Why Do So Many People Are Attracted To Pellet Stove Furnace?

Pellet Stove Furnace

Pellet stoves can be purchased as freestanding units or fireplace inserts that give your home the look of a traditional fireplace with wood burning. They are available as freestanding models or as fireplace inserts. They can provide the appearance of an old-fashioned wood-burning fire.

The auger carries pellets from the hopper into the combustion chamber where they are burned and produce heat. Sensors monitor the flame and can adjust the speed of operation to maintain the desired room temperature.

1. Energy Efficiency

Pellet stoves are a renewable, non-toxic fuel made of compressed sawdust and other substances. They are usually disposed of in landfills, but they can be used to provide a clean, efficient source of heat. This means that they aid homeowners in reducing their energy consumption and reduce greenhouse gas emissions. Many owners of  pellet stoves  report recouping their initial investment within just a few years through lower heating bills.

Pellets are highly compressed and more dense than natural wood, which makes them more efficient to burn. They also produce less creosote than traditional wood-burning fireplaces. They are also packed in plastic bags that seal out moisture and require less frequent cleaning.

Like other heating systems, pellet stoves must be properly measured and vented. A qualified technician can assess your venting and space requirements to ensure the best results.

When the installation is completed the hearth is constructed according to your specifications, and the vent is installed via a hole pre-cut in the exterior of your home. The vent can then be run out either a side wall or the roof, depending on your preference and the local regulations.

Once the vent and hearth are completed then the pellet stove can be plugged in and turned on. Some manufacturers provide the option of a remote control to make it easy to start and keep the fire burning, whereas others provide additional sensors to monitor airflow and combustion as well as flue temperatures and pressure. If the system is able to determine that it needs more pellets or less, it sends a signal to the auger that it should speed up or slow it down in line with the needs.

All stoves come with a storage hopper which can hold between 35 and 130 pounds of pellets. The size of the hopper will determine how often you'll need to replenish your stove. Larger hoppers allow for longer time periods before refills is needed. A grille pulls fresh air from the room and then passes it over an exchanger that then blows heated air into the living area through convection. A grate or an auger distributes the pellets, and the pan beneath is used to collect any burned ones, along with the combustion residue.

While pellet stoves are more efficient than wood-burning models they're not as efficient as natural gas furnaces or electricity-powered heaters. Electric components that drive motorized components of stoves require an electrical supply. This could cause a problem in a power failure, although backup systems such as generators and batteries are available.

2. Low Maintenance

Pellet stoves are extremely efficient, but they need some attention to operate properly. Cleaning your stove and exhaust vent on a regular basis will prevent the buildup of harmful creosote, which can cause a fire or explosion that could damage your stove and/or house.

A pellet stove burns natural wood particles or other materials (like corn kernels, nutshells or small pieces of wood scraps). An auger powered by electricity will feed the fuel pellets from a hopper into the burner and into the combustion chamber. The speed at which pellets are fed into the burner is controlled by the thermostat you set. This lets the fire remain roaring, or to lower the rate or even shut down in accordance with the temperature you set. The ash is disposed of in an empty ash tray beneath the burner. It can be easily removed and then disposed.

Pellets are made from waste products that would have been discarded when processing lumber. They are a renewable source and emit less dust than traditional wood-burning appliances, making them a cleaner burning heat source. The amount of carbon monoxide, carcinogens, and other harmful chemicals produced by pellet stoves is much lower than those with modern wood stoves that have been certified by the EPA.

They are not required to be vented via chimneys, as is the case with traditional wood stoves. Instead, they must be vented correctly via a wall, or another exterior structure. Pellet stoves are equipped with flue ports at the rear or top of the appliance. They are connected to a ventpipe which extends outside the home.

One drawback of pellet stoves is that you have to purchase or store enough pellets to last the winter time. Pellet stove owners typically consume three tons of wood pellets each winter, for a price of $200 per ton. The costs can increase over time, but it is cheaper than purchasing and transporting firewood for a traditional wood-burning fireplace or stove. You should purchase enough pellets to ensure your stove can run through the winter's coldest months. Also, you must have a space to store the pellets (preferably cool and dry).

3. Reduced Carbon Footprint

Pellet stoves use renewable biomass fuel to generate heat, which reduces the need for fossil fuels that are finite. This helps reduce the carbon footprint and also helps diversify the sources of energy used in homes.

Even the most modern woodstoves that are EPA certified emit significantly less than pellet stoves. Emissions from pellet stoves are also considerably less than those from gas furnaces. Pellets are made up of wood, sawdust and other lumber waste. They can also comprise different substances like soybeans, corn as well as nutshells, cherries pits and agricultural waste. When burned, they emit fewer particulates (leading to respiratory problems and allergies), carcinogens, carbon monoxide, and nitrogen oxides.

The major difference between the wood stove and the pellet stove is the feed system. Pellet stoves have hoppers which contain the pellets. When the thermostat or sensors suggest that the room needs heating, the furnace turns. The pellets are fed into the combustion chamber and burn to generate heat. The combustion chamber flows through a heat exchanger that transfers the heat to the blower and out into the room. This results in extremely low emissions and no creosote accumulation.

When the hopper is empty, a cyclone takes away the ash and puts it in an ash pot. The stove also features a fan to circulate the warm, clean air throughout the living area. Most pellet stoves are made to run with minimal maintenance and have a large viewing space for you and your family to enjoy the flames.

The quality of pellets is the primary factor that affects pellet stove emissions. Pellets that are not of the highest quality will cause more emissions. When choosing  small pellet stove , make sure they're certified to meet specific standards and don't contain other ingredients like urea or petroleum products. Choose a company that offers a guarantee and will replace or repair parts in the event of a problem. If you want to take an even greener approach, some states allow homeowners to get a tax credit when installing pellet stoves. This is a great way to help offset the initial cost of this type stove and make installation more affordable.

4. Reduced Noise

Pellet stoves produce less smoke and exhaust when compared to fireplaces that burn wood. They also utilize an electric fan to distribute the heat more evenly across the space. This is a major reason  pellet stoves  need less maintenance than wood stoves. While wood stoves require frequent cleaning of chemical residues and particles to prevent their deterioration stoves can be cleaned with an electric vacuum cleaner.

Many manufacturers have made a conscious effort to create stoves that will be simple to install and operate as well as maintain. They also design their appliances with a variety of styles to match the decor of your home. Some models include WIFI, a programmable thermostat and remote control.

The majority of pellet stoves have an enormous fuel hopper which can contain between 35 and 130 pounds of pellets. The pellets are then pumped into the combustion chamber using an auger. The speed at which pellets are delivered to the burner determines how hot the flame is and the heat output. The hopper may be filled with hardwood pellets composed of dense wood species like hickory and oak or softwood pellets. Some stoves will even make use of alternative biomass pellets such as those made of switchgrass or corn, which can be an environmentally friendly option.

Since pellet stoves burn an environmentally friendly fuel, they emit less smoke than traditional wood-burning fireplaces and require fewer maintenance. They do not need chimneys and are an ideal choice for retrofits and new construction.

In contrast to wood stoves, which require regular maintenance to be free of creosote as well as other chemicals, pellet stoves require periodic inspections to ensure proper operation and maintenance. This could include periodic cleaning and inspection of the ash or "clinker" as well as the motors and fans, depending on the model. Your appliance dealer can provide the proper procedures for your specific brand and model. He can also help you determine the right fuel for your stove and provide information regarding storage and safety.